Westfield Zodiac Premium Lite Air Drive Away Awning 12020240330000

Zodiac Premium Lite Air Drive Away Awning 12020240330000

ZODIAC LOW TUNNEL  Height (180 - 210)
ZODIAC MID TUNNEL    Height (210 - 240)
ZODIAC HIGH TUNNEL  Height (240 - 270)

This is a premium lite air drive away awning from Westfield Outdoors. It uses the premium Hydrotech RipStop fabric which combines high levels of durability with a lower weight, giving teh awning a lower weight, making it easier to carry and use.

HydroTech RipStop Fabric


Advanced Air System (AAS)
The Advanced Air System (AAS) is a high specification air tube system. It has been created to give you the benefits of both a multi-inflation system as well as the ease of use of a single inflation system.
The system uses 4 layers for strength and stability. It has the internal bladder which is the part that you inflate. You then have a dual layer protective cover that has a PE and polyester covers bonded together, that adds protection and increases stability. The PE layer of the protective cover is also reinforced at the stress points giving it extra strength and stability. You then have a sleeve which is sewn into the awning which adds a final layer of protection and stability. This not only improves the protection around your air tube, as well as the stability of the awning as the tube is held in position better.
This single inflation system is inflated and deflated from one single point giving you great ease of use, especially if used in conjunction with an elect pump. The system also has you covered in the event of a failure. Firstly you can remove any affected part of the system, simply by unscrewing the affected tube. The main beam will self seal, leaving you the ability to fix the affected tube. Next the tubes themselves are designed so they can be fixed, by yourself on site, so there is no need to ruin your break and send the awning away to be repaired. You simply unzip the sleeve to get to the protective cover. This is then unzipped which gives you access to the bladder itself. This bladder can be removed, repaired using a puncture repair kit (we recommend using a professional repair kit as some cheaper kits have sub-standard glue) and then put back in. It also uses an easy to use single way valve for inflation which is simplicity itself; simply push the pump in and you are ready to go, there are no fiddly values or sockets, sheer simplicity and ease of use.